Alarm Control System
Access Control System
Photoelectric Beam Sensor

Electro Magnetic Locks
Models & Descriptions
SMART LOOP DETECTOR
Model number Description Features
SLD-12240 SMART LOOP DETECTOR (VEHICLE LOOP DETECTOR) Power: 12¡ã240 VAC¡þVDC
Detection current: AC 125mA Max.¡þDC 100mA Max.
Loop frequency: 4 settings (Low, Med-Low, Med-Hi, Hi)
Grounded loop: transformer isolated
Output on time adjustment: 1¡ã30 sec., relay A
Output transient adjustment: Presence or pulse on entry, presence or pulse on exit. Relay B
Weight: 115 g
Dimensions: 91(L) ¡Ñ 42(W) ¡Ñ 79(H) mm


Emergency Button (Additional pull chain)
Model number Description Features
RS-220BL Emergency Button (Additional pull chain) Voltage¡G10V~15V DC
Current consumption¡G
Standby 7mA / Work 16mA
Output Contact¡GN.C. / N.O.
Contact Rating¡G0.3A/120VAC
Modes¡G
RS-220BL-L¡GON/OFF type
RS-220BL-M¡GMomentary type
Temperature¡G-25¢J¡ã55¢J
IP-56 Ingress Protection
Dimensions¡G118(L)x70(W)x31(D)mm


Emergency Button
Model number Description Features
RS-110BL
RS-110SL 		Emergency Button Output Contact¡GNC/NO
Contact Rating¡G0.3A/50VAC
Modes¡G
RS-110BL¡GSurface Mounted type
RS-110SL¡GBuilt-in type
Dimensions¡G
RS-110BL¡G50(L)x42(W)x31(D)mm
RS-110SL¡G118(L)x70(W)x31(D)mm


Gas Detector
Model number Description Features
RS-119A(AC100-120)
RS-119B(DC-12V)
RS-119C(AC220-240)		 Gas Detector Power supply ¡G
¡@RS-119A(AC100-120)
¡@RS-119B(DC-12V)
¡@RS-119C(AC220-240)
Output Contact¡GNO/NC
Alarm¡GBuzzer (Automatic)
Response time¡Gunder 18 sec
Dimensions¡G110(H)x110(W)x44(D)mm


PIR Motion Detector
Model number Description Features
PIR-3800 Motion Detector PIR-3800
Motion Detector 		Input Volt.:DC 9~16V
Consumption current: 9mA@12VDC
Lens Data"
¡@No. of Fresnel elements: 27
¡@No. of Curtain elements: 9+5
¡@Max. Coverage: 12 x 12 m (40 x 40 ft.)
¡@Total of 46 curtains, equivalent to 214 beams
Alarm and Tamper Switch
Alarm led indicators
Event counter: Selectable, 1 or 2 motion events
Operating temp.: -20¢J ~ 60¢J
RFI Protection: Greater than 20 V/m ¡@(20MHz~1000MHz)
Size (HxWxD): 80x50x37 mm
Weight: Approximately 77 g



Dual Tech. Micro Wave PIR Motion Detector
Model number Description Features
MW-2200 Dual-Technology
MW / PIR		 Direct conversion from analogue to digital
Digital software(TMDT)
No dead zone standard lens
Digital microwave detection
Reflow design
Digital auto pulse signal processing
Field test mode
Digital temperature compensation
Independent LED Indication for MW, PIR and Alarm



Smoke Detector
Model number Description Features
SS-128R Smoke Detector Power supply¡G12V~DC24V AC/DC
Power consumption¡G
Stand-by¡G60uA(DC24V)
Relay on¡G50mA(DC24V)
Alarm Sound Levelm¡G85 dB at 10m
Operating Temperatures¡G5¢XC to 39¢XC
Dimensions¡G41(D)x120(£r)mm


Keypad
Model number Description Features
CODE ¢º Digital Keypad (Surface mount)
 Power supply¡GDC12V
Power current¡GAC110V 1A
Color¡GWhite
No code loss during power failure
Dimensions¡G105(L)x90(W)x30(D)mm



Automatic Emergency Dialer
Model number Description Features
RS-110 Automatic Emergency Dialer
 Working power¡GAC110V¡B60HZ
Automatic detection function
Voltage Output¡GDC12V 1A
2 circuits inside, mutual control circuit
Dimensions¡G300(L)x210(W)x65(D)mm


Key Switch
Model number Description Features
SL-S1L
SL-S1P
SL-S1PB 		Key Switch Built-in tamper switch
Silver plated contact
Micro-switch as anti-damage circuit
Standard Single Gang Mounting Box
Dimensions¡G131(L)x73(W)x44(D)mm


Cable Fence Contacts
Model number Description Features
RS-05 Cable Fence Contacts Connect Point¡GNC/NO connection point (without stable pressure)
Contact rating¡G250V/5A
Line-Pulling Power¡G 20kg
Action Power¡G 2kg
Dimensions¡G30(H)x96(W)x30(D)mm


Piezo Siren
Model number Description Features
RS-KG203 Mini Siren Power supply¡G6~12 VDC
Power consumption¡G150mA
Siren output¡G105dB
Color¡Gblack
Size¡G39(L)x44(W)x58(D)mm


RS-JS35 Siren Power Supply¡G12 VDC
Output Range¡G10W
Color¡Gblack
Installation Location¡GOutdoor-Indoor


RS-LD95 Siren with Strobe Power supply ¡G10V-14 VDC
Siren output¡G110dB
Color¡GIvory+Blue or Red lens
Strobe or siren with strobe
Dimensions¡G120(L)x74(W)x42(T)mm


Glass Breaking Detector
Model number Description Features
RS-GS020S

Contact Resistance¡G7£[
Open Circuit Time¡G> 3 sec.
Trigger Impedance¡G> 1M£[
Operating Temperature¡G-20¢J¡ã80¢J
Peak Withstand Current¡G18VDC¡A70mA
Peak Let-through Voltage¡G18VDC
Weight¡G40g
Size¡G38(£p)¡Ñ10(T)cm


Overhead Door Contacts
Model number Description Features
RS-06 Overhead Door Contacts 2" (50 mm) Operating Gap
L-shape Stainless steel bracket: adjustable
Armored cable wire length: 24" (61 cm)
UL standard grade AWG#22 wiring
Color: Gray


Roller Up Magnetic Shutter Sensor (Contacts)
Model number Description Features
SS-12 Roller Up Magnetic Shutter Sensor
(Contacts)  

Contact rating: 0.2 A/30VDC
Sensing range: 60 mm
Siliding/Swivel housing & brackets:Upper bracket: 270¢X, bottom housing: 360¢X
Contact Capacity: 5W
Length of lead wire:20 cm
Material: ABS
Color: Grey (White, black, brown colors available)


PTE-100¡B72 Press to Exit Plate Mechanical life: 1,000,000 cycles min
Durable stainless steel plate
Dimensions: 115¡Ñ70¡Ñ26(mm)
Weight: 150g



PTE-100SQ Press to Exit Plate Mechanical life: 1,000,000 cycles min
Durable stainless steel plate
Dimensions: 86¡Ñ86¡Ñ12(mm)
Weight: 150g



PTE-150¡B250 Press to Exit Plate Mechanical life: 1,000,000 cycles min.
LED life: 50,000 cycles min.
1 N.O. pole / 1 N.C. pole momentary action.
Durable stainless steel plate
Stainless steel push button panel sealing protection IP40.
Dimensions: 115¡Ñ70¡Ñ26(mm)
Weight: 150g




PTE-180¡B280 Press to Exit Plate Mechanical life: 1,000,000 cycles min.
LED life: 50,000 cycles min.
1 N.O. pole / 1 N.C. pole momentary action.
Durable stainless steel plate
Stainless steel push button panel sealing protection IP40.
Dimensions: 38.5¡Ñ115¡Ñ36(mm)
Weight: 42.14g
¡@¡@

¡@¡@


PTE-300 & PTE-500 No Touch Exit Sensor No touch / Touch free Exit Sensor (Diffused Detection)
Optical / Infrared Technology
IP-55 Ingress Protection / SUS 304 Stainless steel Plate
User friendly (Healthy protection):Free from contagious diseases spread
Detection range: 0.1 ~ 10 cm
Application: Gate/Door/Exit/Automation control
High capacity of relay dry contact (3A/AC120V,DC30V)
Normally open/Normally close/Common relay output
Twin led indicators for sensor standby or approached:(1) Sensor Standby: Blue led on (2) Visitors whom approached to the sensor in 10 cm:Red led on



PTE-300SQ & PTE-500SQ No Touch Exit Sensor No touch / Touch free Exit Sensor (Diffused Detection)
Optical / Infrared Technology
IP-55 Ingress Protection / SUS 304 Stainless steel Plate
User friendly (Healthy protection):Free from contagious diseases spread
Detection range: 0.1 ~ 10 cm
Application: Gate/Door/Exit/Automation control
High capacity of relay dry contact (3A/AC120V,DC30V)
Normally open/Normally close/Common relay output
Twin led indicators for sensor standby or approached:(1) Sensor Standby: Blue led on (2) Visitors whom approached to the sensor in 10 cm:Red led on



PTE-28 Press to Exit Plate Mechanical life: 1,000,000 cycles min
Durable stainless steel plate
Dimensions: 115¡Ñ70¡Ñ26(mm)
Weight: 150g


Magentic Contacts
Model number Description Features
MC-01
MC-02 		Magnetic switch Contact¡GClosed Loop
Wide Gap¡G25mm
Contact Rating¡G0.5A@100VDC
Color¡GWhite and Brown
Mount¡GSurface/Screw terminals


MC-03 Magnetic switch Contact¡GClosed Loop
Wide Gap¡G25mm
Color¡GWhite and Brown
Contact Rating¡G0.5A@100VDC
Mount¡GRecessed 3/4"dia.Press fit


MC-04 Magnetic switch Contact¡GClosed Loop
Wide Gap¡G15mm
Contact Rating¡G0.5A@100VDC
Color¡GWhite and Brown
Mount¡GRecessed 3/8"dia.Press fit


MC-05 Magnetic switch Mount¡GSurface/Screw terminals
Contact: N.C. or N.O. types available
¡@(MC-05-NC:NC type / MC-05-NO: NO type)
Wide Gap¡G25mm
Contact Rating¡G0.5A@100VDC
Color¡GWhite / Brown color available
Mount¡GSurface/Screw terminals
Open-Short testing points
Size¡G53.5(L)¡Ñ15.5(W)¡Ñ16(D) mm




MC-06 Magetic Contacts -
Flush Mount Type(Mini Size)		 Contact¡GN.C.
Reed Switch: OKI
Wide Gap¡G10mm
Contact Rating¡G0.5A@100VDC
Color¡GWhite and Brown
Wire length: 30mm


MC-07 Magetic Contacts -
Flush Mount Type		 Contact¡GN.C. or N.O.
Reed Switch: OKI
Wide Gap¡G20mm
Contact Rating¡G0.5A@100VDC
Color¡GWhite and Brown
Wire length: 30mm


MC-08 Magetic Contacts, Surface Mount Type(Mini Size) Contact¡GN.C. or N.O.
Reed Switch: OKI
Wide Gap¡G15mm
Contact Rating¡G0.5A@100VDC
Color¡GWhite and Brown
Wire length: 30mm


MC-10 Magnetic switch Mount¡GSurface/Screw terminals
Contact: N.C. or N.O. types available
¡@MC-10-NC: NC type
¡@MC-10-NO: NO type
Wide Gap¡G20mm
Contact Rating¡G0.5A@100VDC
Color¡GWhite, Brown
Mount¡GSurface/Screw terminals
Open-Short testing points
Size¡G51(L)¡Ñ12.2(W)¡Ñ7(D) mm



MC-12 Magnetic switch Mount¡GSurface/Screw terminals
Contact: N.C. or N.O. types available
¡@MC-12-NC: NC type
¡@MC-12-NO: NO type
Wide Gap¡G25mm
Contact Rating¡G0.5A@100VDC
Color¡GWhite
Mount¡GSurface/Screw terminals
Open-Short testing points
Size¡G53(L)¡Ñ15.5(W)¡Ñ16(D) mm





Traffic Lights
Model number Description Features
TL-5000  

Input Voltage: AC 110V / 220V
Total Current Drain: 30mA
Surge Protection
Humikity: 90¢H
Case: PC Resin
Water Proof: IP-55
Dimensions:W(61cm)¡ÑH(40cm)¡ÑD(10cm)


Model number Description Features
TL-5100  

Input Voltage: DC12V
Output Power: 18W
Current consumption:
¡DWhen red led indicator on: 150~200mA
¡DWhen green led indicator on: 200~300mA
Enviornment Temp.: -20¢J~60¢J
Environment Humidity: 40~90%
Material of housing: Metal
Size: 356(W)¡Ñ242(H)¡Ñ27(D)mm


Shock Sensor
Model number Description Features
SS-007 Shock Sensor 24ct gold plated internal contact
Sensitivity adjustable from High to Low
Suitable for most security system
CE Approved
Dimension: 60(L) x 22(W) x 22(D) mm