 |
Direct conversion from analogue to digital |
|
Digital software(TMDT) |
|
No dead zone standard lens |
|
Digital microwaive detection |
|
Reflow design |
|
Digital auto pulse signal processing |
|
Field test mode |
|
Digtal temperature compensation |
|
Independent LED Indication for MW, PIR and Alarm |
| |
| SPECIFICATIONS
|
|
Sensor Type : Dual element, rectangular PIR sensor |
|
Auto Temperature Compensation : Yes, Digital |
|
Digital Processor : Digital auto pulse signal processing & digital TMDT algorithm software filter out non-motion signal and RFI / EME signal |
|
Detection Speed : 0.2 - 7m / sec |
|
Range : 12mx 90 (standard lens) |
|
Sensitivity Adjust : One pulse count or 2 pulse count |
|
PIR Indication : Green LED flash 5 seconds |
|
Antenna Type : Flat micro strip antenna with FET oscillator |
|
Frequency : FCC and DOC -2.45GHz |
|
Detection Method : Doppler shift |
|
Processing : Doppler + Energy Analysis |
|
Digital Filtering : 50 / 60 Hz |
|
Self - Test : Microwave self - test |
|
Processor Type : 12 / 8 - bit intelligent logic |
|
Sensitivity Adjust : Adjustable from 25% to 100% (3 - 12m) |
|
MW Indication : Green LED lights 5 seconds |
|
Power Input : 10 - 16VDC 30mA |
|
Installation Height : 2.1m + / - 10% |
|
Alarm Indication : Red LED constant light 3 sec (can be disabled) when both MW and PIR sensors are triggered |
|
Alarm Output : N.C., 28 Vdc 0.15A |
|
Trouble Indication : Red and Green LED flash alternatively |
|
Trouble Output : N.C., 28Vdc 0.15A |
|
Tamper Output : N.C., 28Vdc 0.15A |
