Alarm Control System
Access Control System
Photoelectric Beam Sensor

Electro Magnetic Locks

Models&Descriptions

 


Quad-50CS/100CS/150CS/200CS
Quad Photobeam Detector
Features
Laser beam alignment function (optional)
Buzzer sound (beep sound) for beam alignment.
Led indicators for beam strength. ( 5 Leds)
Environment module: the environmental signal is
initiated if the beam reception level is reduced by
approx 50% or more, The module "watches" for a
gradual degradation of the beam reception which is
indicative of extremely poor weather conditions. N.C.
or N.O. signal output is selectable.
Beam alignment volt. testing points
Multi frequency (4 channels selectable)
Quad beams
Heater (optional)
Programmed A.G.C.
Input Volt.:AC/DC 12-24V
IP-55 ingress protection
Sensing range(outdoors):50m/100m/150m/200m
Size: 387(H)113(W)110(D) m/m

Specifications
Model
Quad-50CS
Quad-100CS
Quad-150CS
Quad-200CS
Max. range (Outdoor)
165'(50m)
330'(100m)
495'(150m)
660'(200m)
Max. range (indoor)
330'(100m)
660'(200m)
990'(300m)
1320'(400m)
Current (Tx+Rx)
110mA
115mA
120mA
125mA
Current (Tx+Rx+Heaters)
260mA
270mA
280mA
290mA
Power

AC/DC 12~24V (Non-polarity)

Response time

50msec ~ 700msec(variable)

Alarm output Contact capacity:NC / NO. 1A / 120VAC
Tamper output(Tx&Rx) NC switch, 1A@120VAC
Signal LED (Rx)

Yellow Led - OFF: Beam aligned properly.
@@@@@ - ON: Beam broken or beam alignment not proper.

Power LED(Rx & Tx) Green LED ON:Indicates connected to power
Laser wavelength 650nm
Laser output power <5mW
IP Rating
IP-55
Alignment angle

Horizontal:90X , Vertical:15X

Operating temperature
-13XF(-25J) ~ 131XF(55J)
Weight 5.73lbs. (2.6kg)
Case
PC Resin
Humidity
<70%
Dimensions
387(H)113(W)110(D) m/m